[Ref : DUO CONFORT]
The bottle warmer is a device used in maternities and neonatal units to warm breast milk before it is provided to newborn babies.
Faster and more efficient
Today, the water bath system must be prohibited for health reasons as well as the other existing systems that take too long to heat the milk.
This is the reason why our engineering department designed this new patented bottle warmer which heats in record time.
Available in two versions (2 or 4 bottles).
- Dry air system
- Two cycles are available: thawing and warming.
- The fastest device on the market.
- Each warming compartment operates independently.
- Ejection system for bottles
- Avoids overheating when target temperature is reached.
- Control by microprocessor
- Fully automatic cycles.
- Temperature control system
- Allows to control the temperature of the milk inside the bottle.
- Easy to use and economical
- No special settings required.
- No consumables needed.
- Flexible and adaptable
- It can host different sizes of bottles and syringes thanks to a special adapter.
- It can warm from one to four bottles and syringes at the same time or with delay.
- The heating temperature can be adjusted by a technician.
- Capacity
- Four bottles + syringes.
- Two bottles + syringes.
- Heats in record time.
- 50 ml → 3 min*
- 100 ml → 5 min*
- 200 ml → 7 min*
(*For a initial temperature of 4°C )
| Denomination | Specifications | |
|---|---|---|
| Number of bottles of 250 ml or 130 ml | 2 | 4 |
| Overall dimension of the device (length x depth in mm) | 330 x 402 | 703 x 402 |
| Dimension of the device (length x depth in mm) | 330 x 538 | 703 x 538 |
| Height of the device (mm) | 242 | |
| Power (W) | 600 ou 1200 | |
| Power supply | 230 V three-phase + Earth 400 V three-phase + Neutral + Earth Other power supplies available |
|
- Dry air system
- Two cycles are available: thawing and warming.
- The fastest device on the market.
- Each warming compartment operates independently.
- Ejection system for bottles
- Avoids overheating when target temperature is reached.
- Control by microprocessor
- Fully automatic cycles.
- Temperature control system
- Allows to control the temperature of the milk inside the bottle.
- Easy to use and economical
- No special settings required.
- No consumables needed.
- Flexible and adaptable
- It can host different sizes of bottles and syringes thanks to a special adapter.
- It can warm from one to four bottles and syringes at the same time or with delay.
- The heating temperature can be adjusted by a technician.
- Capacity
- Four bottles + syringes.
- Two bottles + syringes.
- Heats in record time.
- 50 ml → 3 min*
- 100 ml → 5 min*
- 200 ml → 7 min* (*For a initial temperature of 4°C )
| Denomination | Specifications | |
|---|---|---|
| Number of bottles of 250 ml or 130 ml | 2 | 4 |
| Overall dimension of the device (length x depth in mm) | 330 x 402 | 703 x 402 |
| Dimension of the device (length x depth in mm) | 330 x 538 | 703 x 538 |
| Height of the device (mm) | 242 | |
| Power (W) | 600 ou 1200 | |
| Power supply | 230 V three-phase + Earth 400 V three-phase + Neutral + Earth Other power supplies available |
|